Toro 74923 Z Master 6000, Руководство оператора

Страница: 14 / 68

Product Overview
g027333
Figure 4
1. Height-of-cut deck-lift
pedal
6. Roll bar
2. Transport lock 7. Seat belt
3. Parking-brake lever 8. Fuel cap
4. Controls 9. Mower deck
5. Motion-control levers
10. Caster wheel
Controls
Become familiar with all the controls before you start the
engine and operate the machine (
Figure 4 and Figure 5 ).
25
25
10
15
G008951
1
2
3
4
5
6
Figure 5
1. PTO switch 4. Hour
meter/safety-interlock
display
2. Choke 5. Ignition switch
3. Throttle control 6. Fuses
Hour Meter
The hour meter records the number of hours the engine has
operated. It operates when the engine is running. Use these
times for scheduling regular maintenance (
Figure 6 ).
Fuel Gauge
The fuel gauge is located with the hour meter, and the bars
light up when the ignition switch is in the O
N
position ( Figure
6 ).
The indicator light appears when the fuel level is low
(approximately 1 gallon remaining in the fuel tank).
Safety-Interlock Indicators
There are symbols on the hour meter, and the indicate with a
black triangle that the interlock component is in the correct
position (
Figure 6 ).
Battery-Indicator Light
If the ignition key is turned to the O
N
position for a few
seconds, the battery voltage will be displayed in the area
where the hours are normally displayed.
The battery light turns on when the ignition is turned on and
when the charge is below the correct operating level (
Figure
6 ).
Figure 6
1. Fuel gauge (bars) 4. Safety-interlock symbols
2. Battery light 5. Low fuel-indicator light
3. Hour meter
Throttle Control
The throttle control is variable between Fast and Slow .
Choke
Use the choke to start a cold engine. Pull the choke knob up
to engage it.
14