Toro 74920 TITAN ZX4820, Руководство оператора

Страница: 20 / 60

ST
ART
RUN
ST
OP
G008947
Figure 17
2. Turn the ignition key to stop to stop the engine.
Starting and Stopping the
Engine
Starting the Engine
1. Sit down on the seat (Figure 18) and fasten the seat belt.
2. Move the motion controls outward to the neutral lock
position (Figure 18).
3. Set the parking brake (Figure 18); refer to Setting the
Parking Brake.
4. Move the blade control switch (PTO) to the Off
position (Figure 18).
5. Move the throttle lever to Fast.
6. Engage the choke as described in Operating the Choke.
Note:
A warm or hot engine may not require choking.
In this case, first try starting the engine without using
the choke.
G010080
2
3
4
5
1
Figure 18
7. Turn the ignition key to the Start position (Figure 17).
When the engines starts, release the key.
Important:
Do not engage starter for more than 5
seconds at a time. If the engine fails to start allow
a 15 second cool-down period between attempts.
Failure to follow these instructions can burn out
the starter motor.
Note:
Additional starting cycles may be required
when starting the engine for the first time after the fuel
system has been without fuel completely.
ST
ART
RUN
ST
OP
G008947
Figure 19
1. Off 3. Start
2. Run
20