Toro 74582, Руководство оператора

Страница: 25 / 40

Figure 26
1. Center electrode insulator 3. Air gap (not to scale)
2. Side electrode
Important:
Do not clean the spark plug. Always
replace the spark plug when it has a black
coating, worn electrodes, an oily film, or cracks.
2. Check the gap between the center and side electrodes
(Figure 26) and bend the side electrode if the gap
is not correct.
Installing the Spark Plug
1. Install the spark plug and metal washer. Ensure that
the air gap is set correctly.
2. Tighten the spark plug to 15 ft-lb (20.4 N-m).
3. Connect the wire to the spark plug (Figure 25).
4. Close the hood.
Fuel System
Maintenance
Draining the Fuel Tank
Drain the fuel tank when you will not be using the
machine for more than 30 days.
DANGER
In certain conditions, gasoline is extremely
flammable and highly explosive. A fire or explosion
from gasoline can burn you and others and can
damage property.
• Drain gasoline from the fuel tank when the
engine is cold. Do this outdoors in an open area.
Wipe up any gasoline that spills.
• Never smoke when draining gasoline, and stay
away from an open flame or where a spark may
ignite the gasoline fumes.
1. Park the machine so that the left front side is slightly
lower than the right side to ensure that the fuel tank
drains completely.
2. Disengage the blades (PTO).
3. Set the parking brake.
4. Stop the engine and wait for all moving parts to stop.
5. Remove the ignition key.
6. Close the fuel shut-off valve located under the front
of the fuel tank.
7. Loosen the hose clamp at the fuel filter and slide it
up the fuel line away from the fuel filter (Figure 27).
Figure 27
1. Hose clamp 3. Fuel filter
2. Fuel line
8. Pull the fuel line off the fuel filter (Figure 27).
25