Important:
Make sure spring washers are
installed correctly as shown in Figure 50.
5. Install the dust cap (Figure 50).
Cooling System
Maintenance
Cleaning the Engine Screen
and the Oil Cooler
Before each use, check and clean the engine screen and
oil cooler. Remove any build-up of grass, dirt or other
debris from the oil cooler screen and engine screen
(Figure 51 and Figure 52).
Figure 51
1.
Engine screen
2.
Oil cooler
Cleaning the Engine Fins
Service Interval:
Every 100 hours
Every 100 hours clean the engine cylinder and cylinder
head cooling fins. Also clean around carburetor,
governor levers and linkage. This will make sure
adequate cooling to hydraulic pumps, motors and
engine and will reduce the possibility of overheating and
mechanical damage.
1. Remove the engine shroud.
2. Clean the engine cooling fins.
3. Install the engine shroud.
Figure 52
1.
Panel
3.
Screws
2.
Engine shroud
39
Содержание 74262CP
