Toro 73551 Скачать руководство пользователя страница 52

Страница: 52 / 56

Troubleshooting

PROBLEM

CORRECTIVE ACTION

POSSIBLE CAUSES

The tractor operates erratically.

The transmission oil level is
low.

Fill to the full “F” mark on the
transmission oil dipstick when
the transmission is cold.

The transmission control
linkage needs adjustment or
replacement.

Contact your Authorized
Service Dealer.

The transmission is faulty.

Contact your Authorized
Service Dealer.

The tractor operates in both
directions, but with a loss of
power. This condition becomes

th t

The transmission oil level is
low.

Fill to the full “F” mark on the
transmission oil dipstick when
the transmission is cold.

worse as the transmission
becomes hot.

The transmission shows
signs of overheating or water
contamination.

Replace the transmission oil
and filter.

The cooling fan and/or
transmission cooling fins are
faulty or dirty.

Clean the transmission and/or
replace the fan (contact your
Authorized Service Dealer).

The engine is not operating at
full throttle.

Increase the engine speed to
full throttle.

The power steering filter is
dirty.

Contact your Authorized
Service Dealer.

The front wheels do not turn with
the steering wheel.

Air in the hydraulic system.

With the engine running at full
throttle, operate the lift and
turn the steering wheel back
and forth several times.

The steering is noisy.

The power steering filter is
dirty.

Contact your Authorized
Service Dealer.

Abnormal vibration or noise.

The engine mounting bolts
are loose.

Tighten the engine mounting
bolts.

The idler pulley or mower
deck blade is loose.

Tighten the appropriate pulley
or blade fastener.

The transaxle cooling fan is
loose.

Contact your Authorized
Service Dealer.

There is a problem with the
electric clutch.

Contact your Authorized
Service Dealer.

Содержание 73551

























































Результаты поиска

Содержание 73551

Отзывы:

Похожие инструкции для 73551

Бренды по названию

Популярные бренды

Toro 73551, Руководство оператора

Результаты поиска

Содержание 73551

Отзывы:

Похожие инструкции для 73551

Бренды по названию

Популярные бренды