Toro 68138 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 41

Toro 68138 Скачать руководство пользователя страница 25

Fuel System
Maintenance

Replacing the Fuel Filter

Service Interval:

Every 100 hours/Yearly (whichever

comes first) (more often under
dusty, dirty conditions).

1.

Park the machine on a level surface, move
the motion-control levers to the N

EUTRAL

-

LOCK

position, engage the parking brake, and lower
the hopper.

2.

Shut off the engine, and remove the key. Allow
the engine to cool.

3.

Replace the fuel filter as shown in

g185888

g027753

Figure 28

Draining the Fuel Tank

You can drain the fuel tank by removing it and pouring
the fuel out of the fill neck; refer to

Removing the Fuel

Tank (page 25)

. You can also drain the fuel tank by

using a siphon in the following procedure.

DANGER

In certain conditions, fuel is extremely
flammable and highly explosive. A fire or
explosion from fuel can burn you and others
and can damage property.

•

Drain fuel from the fuel tank when the
engine is cold. Do this outdoors in an open
area. Wipe up any fuel that spills.

•

Never smoke when draining fuel and stay
away from an open flame, or where a spark
may ignite the fuel fumes.

1.

Park the machine on a level surface, move
the motion-control levers to the N

EUTRAL

-

LOCK

position, engage the parking brake, and lower
the hopper.

2.

Shut off the engine, and remove the key. Allow
the engine to cool.

3.

Clean around the fuel cap to prevent debris from
getting into the fuel tank (

4.

Remove the fuel cap.

5.

Insert a syphon pump into the fuel tank.

6.

Using the syphon pump, drain the fuel into a
clean fuel can (

).

7.

Wipe up any spilled fuel.

g186224

Figure 29

1.

Fuel cap

24

Go

to

Discount-Equipment.com

to

order

your

parts

«
...
23
24
25
26
27
...
»

Содержание 68138










































Отзывы:

Нет отзывов