Toro 51945, Руководство оператора

Страница: 14 / 23

14 Operation
Operation
Throttle
Trigger
Figure 6
Figure 7
Set Choke to FULL
Set Choke to RUN
Figure 5
Lock-out
Button
Switch
Starter
Grip and
Rope
Throttle
Trigger
Primer
Bulb
Starting the Product
See Figures 5 - 7.
Starting the product differs depending on whether the engine
is cold or warm. Refer to the label on the air filter cover.
To Start a Cold Engine:
Follow these steps to start a cold engine.
1.
Lay the product on a flat, bare surface.
2. Push the primer bulb eight times.
3. Set the choke lever to
FULL
.
4.
Depress lock-out button and squeeze throttle trigger fully
(thru step 7) and pull starter handle sharply until engine
attempts to start (no more than 4x).
5. Set the choke lever to
HALF
.
6.
Pull starter handle until engine runs, no more than 6
pulls.
7. Set the choke lever to
RUN
.
NOTE: In cooler environments, additional pulls of the
starter handle may be required with the choke lever in
the
FULL
position.
To Start a Warm Engine:
Follow these steps to start a warm engine.
1.
Lay the product on a flat, bare surface.
2. Push the primer bulb up to eight times.
3.
Set the choke lever to
RUN
.
4. Depress lock-out button and squeeze throttle trigger
fully, pull the starter cord.
NOTE: If the product does not start, repeat the previous
steps.
Stopping the Product
See Figure 7.
Follow these steps to stop the product.
1.
Release the trigger.
2.
Press on/stop switch to (STOP) position.
On/Stop
Switch