Toro 51888, Руководство оператора

Страница: 11 / 20

000000000000000
000000000000000
000000000000000
000000000000000
Figure 18
1. One-third diameter cut
from the top 3. Second cut from the
bottom
2. Chain saw
If the log is on a hill, always stand on the uphill side of the log
(Figure 19).
Figure 19
1. Direction of slope
Removing the Battery
1. Place the chain saw on a flat surface.
2. Press down on the latch and remove the battery from the
cavity.
Note:
If you have trouble removing the battery, apply
some dielectric grease to the battery terminals (Figure
21). Do not use any other type of lubricant as it can
cause damage to the terminals.
Figure 20
1. Latch
Figure 21
1. Battery terminals
Charging the Battery Pack
WARNING
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, and related
accessories contain lead and lead compounds,
chemicals known to the State of California
to cause cancer and reproductive harm.
Wash hands after handling.
Important:
For best results, your battery tool should
be charged in a location where the temperature is more
11