do the job better and safer at the rate for which it was
designed.
B.
Do not use the power tool if the switch does not turn
it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
C.
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
D.
Store idle appliances indoors.
When not in use,
appliances should be stored indoors in a dry and high
or locked-up place, out of the reach of children.
E.
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly
maintained power tools.
F.
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
G.
Use the power tool in accordance with these
instructions and in the manner intended for the
particular type of power tool, taking into account the
working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
H.
Keep guards in place and in working order.
5.
Service
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will
ensure that the safety of the power tool is maintained.
6.
Battery Safety
A.
Do not charge appliance in rain, or in wet locations.
B.
Do not use battery-operated appliance in the rain.
SAVE THESE INSTRUCTIONS
Safety and Instructional
Decals
Important:
Safety and instruction decals are located
near areas of potential danger. Replace damaged or missing
decals.
decal112-1577
112-1577
1.
Feed the cord into the center section before assembling
the handle.
B C
decal127-7003b
On 127-7003
decal127-7003a
On 127-7003
decal138-6695
138-6695
2
