Toro 41622, Руководство по установке

Страница: 2 / 20

Safety
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (
Figure 2 ),
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
Figure 2
1. Safety alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
WARNING
Chemical substances used in the spray system may
be hazardous and toxic to you, bystanders, animals,
plants, soils, or other property.
• Carefully read and follow the chemical
warning labels and Material Safety Data
Sheets (MSDS) for all chemicals used, and
protect yourself according to the chemical
manufacturer's recommendations. For example,
use appropriate Personal Protective Equipment
(PPE), including face and eye protection, gloves,
or other equipment to guard against personal
contact with the chemical.
• Keep in mind that there may be more than
1 chemical used, and information on each
chemical should be assessed.
• Refuse to operate or work on the sprayer if this
information is not available!
• Before working on a spray system, make sure
that the system has been triple rinsed and
neutralized according to the recommendations
of the chemical manufacturer(s).
• Verify that there is an adequate supply of clean
water and soap nearby, and immediately wash
off any chemicals that contact you.
Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or lost.
93-6674
1. Crushing hazard, hand—read the instructions before
servicing or performing maintenance.
119-4988
1. Lock 2. Unlock
2