Toro 39692, Руководство оператора

Страница: 10 / 44

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Check the fluids and tire pressure.
Operator’s Manual 1
Engine Operator’s Manual 1
Parts Catalog 1
Operator Training Material 1
Registration Card 1
2
Oil drain hose 1
Read the Operator’s Manual and watch
the video before operating the machine.
Note:
Determine the left and right sides of the machine from the normal operating position.
1
Checking the Fluids and Tire
Pressure
No Parts Required
Procedure
• Before you start the engine and use the machine,
check the oil level in the engine crankcase; refer to
Checking the Engine Oil Level.
• Check the grease for the mower and mower deck.
• Check the tire pressure; refer to Checking the Tire
Pressure.
Note:
The cutting blades are set to a 3 inch (76 mm)
height-of-cut at initial purchase. The axle position is D ,
with 4 spacers below both the spindle and the caster.
2
Reading the Manual and
Viewing the Safety Information
Parts needed for this procedure:
1 Operator’s Manual
1 Engine Operator’s Manual
1 Parts Catalog
1 Operator Training Material
1 Registration Card
1 Oil drain hose
Procedure
• Read the Operator’s Manual.
• View the operator training material.
• Fill out the registration card and mail it in or register
online at www.Toro.com.
• Use the oil drain hose when changing the engine oil.
10