Toro 38841, Руководство оператора

Страница: 16 / 32

Using the Wheel-Clutch
Levers
The wheel-clutch levers allow you to momentarily
disengage the drive to 1 or both wheels with the
traction-drive lever still engaged. This enables you to
turn and maneuver the machine easily.
Note:
Holding down the traction lever against the
handle engages the traction drive to both wheels.
To turn the machine to the right, lift up the right
wheel-clutch lever and squeeze it toward the handle
(
Figure 23 ).
g001307
Figure 23
Note:
This disengages the drive to the right wheel
while the left wheel continues driving, and the machine
turns to the right.
Note:
Similarly, squeezing the left wheel-clutch lever
turns the machine to the left.
When you complete the turn, release the wheel-clutch
lever, and the drive re-engages both wheels (
Figure
24 ).
g001308
Figure 24
Momentarily squeezing and releasing the left or right
wheel-clutch lever also allows for steering adjustments
to keep the machine going in a straight line, especially
in deep snow.
Squeezing both wheel-clutch levers simultaneously
disengages the drive to both wheels. This enables
you to manually move the machine backward without
stopping to shift it into a reverse gear. It also allows
you to maneuver and transport the machine more
easily when the engine is not running.
Operating the Speed
Selector
The speed selector has 6 forward and 2 reverse
gears. To change speeds, release the traction lever
and shift the speed-selector lever to the desired
position (
Figure 25 ). The lever locks in a notch at
each speed selection.
g322971
Figure 25
Operating the
Auger/Impeller Drive
1. To engage the auger/impeller drive, squeeze
the right (auger/impeller) lever to the handgrip
(
Figure 26 ).
g322975
Figure 26
2. To stop the auger and impeller, release the right
lever.
Important:
When you engage both the
auger/impeller lever and the traction lever,
the traction lever locks the auger/impeller
lever down, freeing your right hand. To
release both levers, simply release the left
(traction) lever.
3. If the auger and impeller continue to rotate when
you release the auger/impeller lever, do not
operate the machine. Check the auger/impeller
cable; refer to
Checking and Adjusting the
Auger/Impeller Cable (page 22) and adjust it if
necessary. Otherwise, take the machine to an
Authorized Service Dealer for service.
16