result. Drain the excess oil until the oil level on
the dipstick reads Full.
9. Insert the dipstick into the filler neck and rotate the
cap clockwise until it is tight.
7
Checking the Tire Pressure
No Parts Required
Procedure
The tires are overinflated at the factory for shipping.
Reduce the pressure equally in both tires to between 12
and 15 psi (82 and 103 kPa).
8
Checking the Skids and
Scraper
No Parts Required
Procedure
Refer to Checking and Adjusting the Skids and Scraper
in Maintenance.
Product Overview
Figure 14
1.
Auger/impeller drive
control lever
6.
Oil fill/dipstick
2.
Traction control lever
7.
Chute deflector handle
3.
Discharge chute control
8.
Snow clean-out tool
4.
Speed selector lever
9.
Auger
5.
Fuel tank cap
Figure 15
1.
Choke
5.
Recoil starter
2.
Ignition switch
6.
Oil drain plug
3.
Fuel shutoff valve
7.
Primer
4.
Throttle
13