5
3329-465
Product Overview
1
2
3
4
5
8
6
7
9
m-6230a
1.
Discharge chute
2.
Chute crank
3.
Control bar
4.
Handle
5.
Control panel
6.
Knobs
7.
Handle bolt (2)
8.
Rotor blades
9.
Fuel tank cap
1
2
3
4
m5544
1.
Key switch
2.
Primer
3.
Recoil start
4.
Choke lever
Setup
Installing the Wheels
1.
Turn the
snowthrower onto its
left side and place a
block under the left
axle end.
2.
Slide the short
spacer (A) and a
wheel onto the right
axle end.
Note: The side of the
wheel with 6 spokes
must face downward.
m-6217
A
3.
Put a pushnut onto the end of the axle and use a
hammer to seat it firmly in place.
m-6218
4.
Turn the snowthrower onto its right side and place
a block under the right axle end.
5.
Repeat steps 2 through 4 (see note below).
Note: Slide the long spacer and a wheel onto the left
axle end.
