Toro 38453, Руководство оператора

Страница: 14 / 20

Figure 29
1. Oil fill cap
7. Unscrew the oil fill cap and remove it (Figure 29).
8. With the machine in the operating position, carefully
pour oil into the oil fill hole to the point of overflow
(Figure 31).
Max fill: 20 oz. (0.6 l), type: automotive detergent oil
with an API service classification of SJ, SL, or higher.
Use Figure 30 below to select the best oil viscosity
for the outdoor temperature range expected:
Figure 30
Figure 31
9. Wait 3 minutes for the oil to settle and add enough
to bring it to the point of overflow.
10. Screw the oil fill cap into the oil fill hole, and hand
tighten it securely.
11. Wipe up any spilled oil.
12. Dispose of the used oil properly at a local recycling
center.
Servicing the Spark Plug
Service Interval: Yearly—Service the spark plug and
replace it if necessary.
Use a NGK BPR6ES or Champion RN9YC spark
plug or equivalent.
1. Stop the engine and wait for all moving parts to stop.
2. Rotate the discharge chute so that it faces forward.
3. Remove the discharge chute, the discharge chute
handle, and the chute seal by removing the 3 large
screws and one small screw (Figure 32).
Figure 32
1. Large screws (3) 4. Small screw
2. Discharge chute handle 5. Chute seal
3. Discharge chute
4. Remove the 4 screws that secure the shroud
(Figure 33).
14