Toro 38086, Руководство оператора

Страница: 16 / 32

16
•
Ignition Switch (Fig. 20)—Insert the key before
starting the engine. To stop the engine, remove the key.
4
3
2
m–4034
1
Figure 20
1. Ignition switch
2. Choke
3. Throttle
4. Primer
•
Choke (Fig. 20)—Rotate the choke clockwise to the On
position to start a cold engine. As engine warms up,
gradually rotate the choke counterclockwise to the Off
position.
•
Throttle (Fig. 20)—Move the throttle upward to
increase the engine speed; move it downward to
decrease the engine speed. Move the throttle to the Stop
position to stop the engine.
•
Primer (Fig. 20)—Press the primer to pump a small
amount of gasoline into the engine for improved
cold-weather starting.
•
Fuel Shutoff Valve (Fig. 21)—Close the valve by
rotating it clockwise. Open the valve by rotating it
counterclockwise. Close the valve when you do not use
the snowthrower.
726
3
2
1
Figure 21
1. Fuel line
2. Hose clamp
3. Fuel shutoff valve
•
Recoil Starter (Fig. 22)—The recoil starter is on the
back side of the engine. Pull the recoil starter to start the
engine.
934
1
Figure 22
1. Recoil starter
•
Electric Starter (Fig. 23)—Push the starter button to
start the engine.
m–4516
1
2
4
3
Figure 23
1. Electric starter
2. Starter button
3. Receptacle
4. Power cord
•
Power Cord (Fig. 23)—Connect the power cord to the
electric starter and to an electrical outlet when starting
the engine.
Removing the Carburetor
Heater Box
If you operate the engine when the air temperature is above
40
F (4 C), remove the carburetor heater box (Fig. 24).