Toro 34215, Руководство оператора

Страница: 30 / 80

Cam Settings for Grass Seed Application (cont'd.)
Type Bag Weight Coverage - m 2 (ft 2 ) Cam Setting –
Full Rate
Cam Setting –
Half Rate
Spreader Width
0.9 kg (2 lb) 93 (1,000) 6.0 6
1.81 kg (4 lb) 93 (1,000) 7.0 6
Mixtures Including
Coarse Seeds
2.72 kg (6 lb) 93 (1,000) 7.0 6
0.9 kg (2 lb) 93 (1,000) 6.0 6
1.81 kg (4 lb) 93 (1,000) 7.0 6
Rye Grasses or Tall
Fescue
2.72 kg (6 lb) 93 (1,000)
7.75
6
113 kg (4 oz) 93 (1,000) 1.9 8
227 g (8 oz) 93 (1,000) 2.1 8
Dichondra
340 g (12 oz) 93 (1,000) 2.5 8
1.81 kg (4 lb) 93 (1,000) 4.5 3.75
7
2.27 kg (.5 lb) 93 (1,000)
4.75 4.0 7
Pensacola Bahia
2.72 kg (6 lb) 93 (1,000) 5.0 4.25 7
Adjusting the Spreader Pattern
If the spreader casts material unequally side-to
side—too light/heavy to one side—(see
Figure 29 and
Figure 30 ), adjust the spreader-pattern.
g025543
Figure 29
1. Heavy to left side 3. Heavy to right side
2. Move ramp pattern to
shaded position
Note:
Do not adjust the ramps that split the product
flow. Adjust only the front or rear ramp positions.
1. Unlock the spreader-pattern control by turning
the handle counterclockwise 90° as shown in 2
of
Figure 30 .
g027035
Figure 30
1. Spreader-pattern control 4. Start notch if pattern is
heavy to right side
2. Rotate counterclockwise
to unlock 5. Rotate clockwise to lock
3. Start notch if pattern is
heavy to left side
2. Adjust the spreader pattern as follows:
•
If the material is broadcast too heavy
at the left side of the machine, pull the
spreader-pattern control up slightly; refer to
3 of
Figure 30 .
•
If the material is broadcast too heavy at
the right side of the machine, push the
spreader-pattern control down slightly; refer
to 4 of
Figure 30 .
30