Toro 323000101, Руководство оператора

Страница: 20 / 200

Problem Possible Cause Corrective Action
1. There is an error in
the communication
between the battery
pack and the charger.
1. Remove the battery
pack from the battery
charger, unplug the
battery charger from
the outlet, and wait
10 seconds. Plug the
battery charger into the
outlet again and place
the battery pack on the
battery charger. If the
LED indicator light on
the battery charger is
still blinking red, repeat
this procedure again.
If the LED indicator
light on the battery
charger is still blinking
red after 2 attempts,
properly dispose of the
battery pack at a battery
recycling facility.
The LED indicator light
on the battery charger is
blinking red.
2. The battery pack is
weak.
2. Properly dispose of the
battery pack at a battery
recycling facility.
1. There is moisture on
the leads of the battery
pack.
1. Allow the battery pack
to dry or wipe it dry.
The tool does not run or
does not run continuously.
2. The battery is not fully
installed into the tool.
2. Remove and then
replace the battery into
the tool making sure
that it is fully installed
and latched.
18