Using the Inverter
Important:
Use the inverter only in temperatures
that are within the appropriate range; refer to
Specifications (page 6)
.
Important:
Ensure that the combined load
requirement of your equipment does not exceed
the inverter’s output rating.
Important:
Do not connect the inverter to a
household wall outlet or any AC distribution
wiring, and do not connect the neutral inverter
connector to ground.
1.
Install the battery; refer to
(page 6)
2.
Press the power button on the back of the
inverter to turn the inverter on, the LED lights up
to solid green (
).
3.
Connect your device to a USB port or the AC
receptacle (
g333936
Figure 5
4.
The power button has an LED that signals the
condition of the inverter; refer to the following
table to interpret the LED indicator light on the
inverter.
Indicator light
Condition
Off
No battery pack inserted
Solid Green
Normal operation
Flashing Green
Low battery voltage
Solid Red
High-voltage protection or battery error
Flashing Red,
intervals of 4
Short-circuit protection or overload
protection
Flashing Red,
intervals of 5
Low-voltage protection
Flashing Red,
intervals of 6
Battery pack and/or battery inverter is over
or under the appropriate temperature range.
*Refer to
Troubleshooting (page 9)
for more
information.
Important:
Whenever the inverter is not in
use, turn the inverter off and remove the
battery from the inverter.
7
