Toro 31512, Инструкция по установке

Страница: 3 / 4

5. Secure the clamp and wire harness to the rear
frame with the bolt and washer removed in the
previous step (
Figure 5 ).
g032356
Figure 5
1. Rear frame 3. Washer
2. Clamp 4. Bolt
6. Connect the male and female connectors of the
wire harness to the male and female terminals
of the backup alarm (
Figure 6 ).
g032357
Figure 6
1. Female terminal—backup
alarm 3. Male connector—wire
harness
2. Male terminal—backup
alarm 4. Female connector—wire
harness
7. Connect the backup alarm wire harness to main
machine wire harness.
8. Connect the positive battery cable from the
battery.
9. Connect the negative battery cable from the
battery.
Installing the Backup Alarm
Groundsmaster 5900 Series Machines
1. Coil the harness and secure it with a cable tie
(
Figure 7 ).
2. Install the backup alarm as shown in Figure 7 .
g035700
Figure 7
1. Hex-head screws (1/4 x
3/4 inch) 4. Flange nut (1/4 inch)
2. Cable-tie around the coil 5. Backup alarm
3. Wire harness
3. Connect the positive battery cable from the
battery.
4. Connect the negative battery cable from the
battery.
3
Enabling the Alarm in the
InfoCenter
No Parts Required
Enabling the Alarm
Groundsmaster 4000 and 4100 Series
Machines
Note:
For the backup alarm to function on a
Groundsmaster 4000 and 4100, install software
version K or greater.
1. Press the left button twice to get to the Main
Menu (
Figure 8 ).
3