Toro 315000001, Руководство оператора

Страница: 12 / 32

5. Install a 90° barbed fitting (3/4 inch NPT x 3/4 inch)
onto each of the threaded openings of the rinse-nozzle
bulkheads (
Figure 19 ).
G022283
1
2
Figure 19
1. 90° barbed fitting (3/4 inch
NPT x 3/4 inch)
2. Rinse-nozzle assembly
6. Align the 90° barbed fittings toward the middle of the
right side of the machine.
4
Installing the Rinse Pump
Parts needed for this procedure:
2 Carriage bolt (3/8 x 1 inch)
2 Flanged Locknuts (3/8 inch)
1 Rinse-pump mounting bracket
2 Straight-barbed fitting (1/2 inch NPT x 1/2 inch)
1 Nipple (1/2 inch NPT)
1 Pressure filter
1 Rinse pump
1 Valve mount
4 Bolt (1/4 x 1-3/4 inch)
4 Washer (1/4 inch)
4 Serrated-flange nut
2 Small hairpin
Installing the Valve Mount
1. Remove the bolt (3/8 x 5 inch), washers, flanged
locknut, and hairpin that secure the right, rear tank
straps at the top of the tank.
Note:
Retain the bolt (3/8 x 5 inch), washers, flanged
locknut, and hairpin.
2. Install 1 carriage bolt (3/8 x 1 inch) in the
upper-inboard holes of the right, rear tank strap (
Figure
20 ).
Note:
Loosely thread a flanged locknuts (3/8 inch)
onto the carriage bolt.
1
2
3
1
g024697
4
Figure 20
1. Nut 3. Valve mount
2. Carriage bolt 4. Hairpin
3. Install 1 carriage bolts (3/8 x 1 inch) in the
lower-outboard holes of the right, rear tank strap
(
Figure 20 ).
4. Install the tank strap hardware that you removed in 1
to secure the straps to the tank.
Note:
Ensure that the square portion of the carriage
bolts are seated in the square opening in the tank straps.
Note:
Make sure that the straps are flush to the tank.
Do not overtighten tank strap hardware .
5. Assemble the valve mount to the 2 carriage bolts (3/8
x 1 inch) using 2 flange locknuts (
Figure 20 ).
Assembling the Pressure Filter and
Rinse Pump
Note:
Apply PTFE tape to the threads of the taper-threaded
fittings used in the sprayer and rinse systems.
1. Assemble nipple (1/2 inch NPT x 1/2 inch) into
the inlet of the pressure filter assembly and the
straight-barbed fitting (1/2 inch NPT x 1/2 inch) into
the outlet (
Figure 21 ).
Note:
The arrow at the top of the pressure filter
points to the outlet side of the filter head.
12