g318353
Figure 1
1.
Flange nut (5/16 inch)
4.
Decal
7.
Right baffle
2.
Rear shield
5.
Left baffle
3.
Carriage bolt (5/16 x 3/4 inch)
6.
Center baffle
3
Страница 1: ...e 1 Center baffle 1 Right baffle 1 Rear shield 1 Blade 3 Anti scalp cup 3 2 Blade bolt 3 Install the baffles 1 Preparing the Machine No Parts Required Preparing the Machine 1 Park the machine on a level surface 2 Shift to the NEUTRAL position 3 Lower all attachments if equipped 4 Engage the parking brake 5 Shut off the engine and remove the key 6 Disconnect the battery refer to your machine Operat...
Страница 2: ...anical or hydraulic jacks to lift the machine 1 Raise the front of the machine and support it with jack stands 2 Remove the existing blades 3 Loosely install the new baffles under the mower deck with the 26 carriage bolts 5 16 x 3 4 inch and 26 flange nuts 5 16 inch refer to Figure 1 Note Position the bolt heads inside the mower deck except for the right side bolts Figure 1 4 Loosely install the r...
Страница 3: ...g318353 Figure 1 1 Flange nut 5 16 inch 4 Decal 7 Right baffle 2 Rear shield 5 Left baffle 3 Carriage bolt 5 16 x 3 4 inch 6 Center baffle 3 ...
Страница 4: ...part of the blade is pointing toward the inside of the mower deck g004741 Figure 2 1 Blade bolt 2 Anti scalp cup 6 Rotate the blades to ensure that there is no interference 7 Tighten all the nuts and bolts 8 Raise the front of the machine up remove the jack stands and lower the machine 9 Connect the battery refer to your machine Operator s Manual 4 ...