
Form No. 3438-876 Rev A
Rear Discharge Completion Kit
Base 72in Mower for Groundsmaster
®
360 Multi-Purpose Machine
Model No. 30549
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the machine.
Carriage bolt (5/16 x 3/4 inch)
26
Flange nut (5/16 inch)
26
Left baffle
1
Center baffle
1
Right baffle
1
Rear shield
1
Blade
3
Anti-scalp cup
3
2
Blade bolt
3
Install the baffles.
1
Preparing the Machine
No Parts Required
Preparing the Machine
1.
Park the machine on a level surface.
2.
Shift to the N
EUTRAL
position.
3.
Lower all attachments (if equipped).
4.
Engage the parking brake.
5.
Shut off the engine and remove the key.
6.
Disconnect the battery; refer to your machine
Operator’s Manual
.
© 2020—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3438-876* A