Toro 30531, Руководство оператора, Страница: 37 / 44

37
2
4
3
1
5
m-3781
6
Figure 46
1. Deflector
2. Spring
3. Deflector mount
4. Locknut
5. Bolt
6. Spacer
2. Straighten the deflector mounts if they are bent
(Fig. 46).
3. Install a new deflector between the mounts with a
spacer and a spring.
4. Hook the front end of the spring around the front
deflector mount.
5. Insert the bolt through the spacer and secure it with a
locknut.
6. Ensure that there is downward spring force on the
deflector (Fig. 46).
7. Tighten the bolt and locknut until they lightly contact
the pivot brackets (Fig. 46).
Important
The grass deflector must be spring-loaded in
the down position. Lift the deflector up to check that it
snaps to the fully down position.