Toro 30484, Руководство оператора

Страница: 29 / 60

Figure 34
1. Fuel filter 3. Fuel shut-off valve
2. Clamp
Servicing the Fuel Filter
Service Interval: Every 200 hours/Yearly (whichever
comes first)
Replacing the Fuel Filter
Never install a dirty filter if it is removed from the fuel
line.
Note:
Note how the fuel filter is installed in order to
install the new filter correctly.
Note:
Wipe up any spilled fuel.
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Close fuel shut-off valve at the fuel tank (Figure 34).
4. Squeeze the ends of the hose clamps together and
slide them away from the filter (Figure 35).
Figure 35
1. Hose clamp 3. Filter
2. Fuel line
5. Remove the filter from the fuel lines.
6. Install a new filter and move the hose clamps close
to the filter.
7. Open fuel shut-off valve at fuel tank (Figure 34).
8. Check for fuel leaks and repair if needed.
9. Wipe up any spilled fuel.
Servicing the Fuel Vent System
Service Interval: Every 200 hours/Yearly (whichever
comes first)
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Remove the existing fuel vent filter (Figure 36).
4. Install a new filter.
29