Toro 30447, Руководство оператора

Страница: 35 / 76

Traction Unit
Service Interval: Every 50 hours
• Brake shaft pivot bearings (5) (Figure 37)
• Traction pedal pivot bushing (1) (Figure 38)
• Front and rear axle pivot bushings (2) (Figure 39)
• Steering cylinder ball joints (2) (Figure 40)
• Tie rod ball joints (2) (Figure 40)
• King pin bushings (2) (Figure 40).
The top fitting on the king pin should
only be lubricated annually (2 pumps).
Figure 37
Figure 38
Figure 39
Figure 40
Center Cutting Unit
Note:
Deck may have to be raised to expose the grease
fittings for the latch pivot and the lower link.
• Latch pivot (2) (Figure 42)
Note:
The latch (Figure 41) may need to be
manually tripped to gain access to the grease fitting.
Use a prybar to close and re-open the latch
Figure 41
1. Latch
35