Toro 30284, Руководство оператора, Страница: 28 / 64

Figure 30
1. Engine 4. Foam element
2. Cover 5. Paper element
3. Wing nut 6. Cover knob
Cleaning the Foam Air Cleaner Element
Service Interval: Every 25 hours
1. Wash the foam element in liquid soap and warm
water. When the element is clean, rinse it thoroughly.
2. Dry the element by squeezing it in a clean cloth.
Important:
Replace the foam element if it is
torn or worn.
Servicing the Paper Air Cleaner
Element
Service Interval: Every 50 hours—Check the paper air
cleaner element.
Every 200 hours—Replace the paper
air cleaner element.
1. Do not clean the paper filter (Figure 30).
2. Inspect the element for tears, an oily film, or damage
to the rubber seal.
3. Replace the paper element if it is damaged.
Installing the Foam and Paper Elements
Important:
To prevent engine damage, always
operate the engine with the complete foam and
paper air cleaner assembly installed.
1. Carefully slide the foam element onto the paper air
cleaner element (Figure 30).
2. Place the air cleaner assembly onto the air cleaner
base and secure it with the 2 wing nuts (Figure 30).
3. Place the air cleaner cover into position and tighten
the cover knob (Figure 30).
Servicing the Engine Oil
Note:
Change the oil more frequently when the
operating conditions are extremely dusty or sandy.
Oil Type: Detergent oil (API service SF, SG, SH, or SJ)
Crankcase Capacity: 58 ounces (1.7 liter) with the filter
removed; 51 ounces (1.5 liter) without the filter removed
Viscosity: Refer to the table (Figure 31).
Figure 31
Checking the Engine Oil Level
Service Interval: Before each use or daily
1. Park the machine on a level surface.
2. Disengage the PTO and set the parking brake.
3. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
4. Clean around the oil dipstick (Figure 32) so that dirt
cannot fall into the filler hole and damage the engine.
28