Toro 30151, Руководство оператора

Страница: 6 / 24

Assembly
4
Installing the Castor Wheels
1. Place the (2) thrust washers and spacer onto the
castor wheel fork (Fig. 1).
2. Insert the castor wheel fork into the carrier frame
mounting tube (Fig. 1).
3. Install (2) thrust washer onto the castor wheel
fork, then secure with a locking pin (Fig. 1).
m-4225
4
2
1
3
5
2
Figure 1
1. Locking Pin
2. Thrust Washer (4)
3. Carrier Frame Mounting
Tube
4. Spacer
5. Castor Wheel Fork
4. Set the castor wheel tire pressure to 25–30 psi
(172–207 kPa).
Installing the Carrier Frame to
the Traction Unit
1. Align the carrier frame holes with the mounting
holes in the traction unit frame (Fig. 2).
2. Fasten each side of the carrier frame to the
traction unit with three (3) 1/2” x 1” (25 mm)
flange screws and locknuts. Torque the mounting
screws to 60–80 ft-lb (81–109 N
S
m) (Fig. 2).
2
1
m-1074
Figure 2
1. Carrier Frame 2. Traction Unit Frame