background image

The TORO Company

Printed in USA

All Rights Reserved

Introduction

We want you to be completely satisfied with your

new product, so feel free to contact your local

Authorized Service Dealer for help with service,

genuine replacement parts, or other information you

may require.

Whenever you contact your Authorized Service

Dealer or the factory, always know the model 

number of your product. This number will

KHOS

the Service Dealer or Service Representative

provide exact information about your specific

product. 
 

The warning system in this manual identifies

potential hazards and has special safety messages that

help you and others avoid personal injury, even death.

DANGER, WARNING and CAUTION are signal

words used to identify the level of hazard. However,

regardless of the hazard, be extremely careful.

DANGER

 signals an extreme hazard that will cause

serious injury or death if the recommended

precautions are not followed.

WARNING

 signals a hazard that may cause serious

injury or death if the recommended precautions are

not followed.

CAUTION

 signals a hazard that may cause minor or

moderate injury if the recommended precautions are

not followed.

Two other words are also used to highlight

information. “Important” calls attention to special

mechanical information and “Note” emphasizes

general information worthy of special attention.

The left and right side of the machine is determined

by sitting on the seat in the normal operator’s

position.

Содержание 30124









Отзывы: