Toro 29645, Руководство оператора

Страница: 14 / 20

9. Install the dipstick securely.
10. Recycle the used oil properly.
Lubricating the Upper Handle
Service Interval: Yearly or before storage
Lubricate the left and right sides of the upper handle with a
low-viscosity silicone spray lubricant yearly or as needed.
1. Spray the outer plastic end of the inner handle ( Figure
20 ).
Figure 20
Note:
Use the straw that comes with the spray can to
direct the spray.
2. Push the upper handle fully down and spray the inner
plastic surface of the outer handle (
Figure 21 ).
Figure 21
Adjusting the Self-Propel Drive
If your machine does not self-propel properly, adjust the
self-propel drive cable.
1. Loosen the nut on the cable mount ( Figure 22 ).
Figure 22
1. Cable mount
2. Pull the upper handle back fully rearward.
Note:
If the handle does not move smoothly, refer to
Lubricating the Upper Handle (page 14) .
3. Pull the cable jacket downward until you remove the
slack in the exposed cable (
Figure 23 ).
Figure 23
1. Exposed cable
4. Push the cable jacket upward 3 mm (1/8 inch).
14