Toro 25433, Руководство по установке

Страница: 6 / 8

Figure 13
Side view of machine
4. Secure harness using provided cable ties.
Important:
Make sure to avoid sharp edges and
moving parts.
5. Connect the two-pin connector from the kit harness to
the previously installed valve.
6. Connect the spade terminal at the end of the harness
to the mating connector at the fuse block.
7. Install the 10 Amp fuse into the appropriate open
position in the fuse block.
8. Attach the ring terminal to the ground block near the
fuse block.
9. Install the foot pedal and floor access panel.
6