Toro 23825, Руководство оператора

Страница: 30 / 128

Main-selection Screen
To access this screen, press the down arrow on the Main Drill
Functions Displayed in Torque Screen (page 27) .
This screen allows the user to choose from the following
options:
•
Button 1—Return to the Machine-information
Screen (page 26) as shown in Figure 22
•
Button 2—Lubrication and maintenance chart ( Figure 22 )
•
Button 3—Read error codes ( Figure 22 )
•
Button 4—Return to the Main-selection Screen (page 30)
as shown in Figure 22
•
Button 5—Diagnose and adjust parameters ( Figure 22 )
•
Button 6—Adjust the loader calibration ( Figure 22 )
•
Button 7—Clear a service reminder ( Figure 22 )
•
Button 8—Air-hammer control ( Figure 22 )
•
OK button—Return to the Control-select Screen (page
25) as shown in Figure 22
1
2
3
4
5
6
7
8
OK
ESC
g025088
1
2 3 4
5
6 7 8
9
Figure 22
Main-selection Screen
1. Machine information 6. Clear service reminder
2. Lubrication and
maintenance chart
7. Control/joystick selection
3. Loader calibration 8. Error codes
4. Diagnose and adjust
parameters 9. Return to the Main
Operating Screen
5. Air-hammer control
Lubrication and Maintenance Screens
To access this screen, press button number 2 on the
Main-selection Screen (page 30) .
These screens provide the user with maintenance schedules
at 10-hour, 50-hour, 250-hour, 500-hour, and 1,000-hour
increments.
Note:
Press the OK button to exit this screen.
Press the following buttons to attain the subsequent
maintenance schedule:
•
Button 1—10-hour and 50-hour maintenance schedule
(
Figure 24 )
•
Button 2—250-hour maintenance schedule ( Figure 25 )
•
Button 3—500-hour maintenance schedule ( Figure 26 )
•
Button 4—1,000-hour maintenance schedule ( Figure 27 )
Figure 23
Main Maintenance Screen
Figure 24
10-Hour and 50-Hour Maintenance Screen
30