Toro 23518, Руководство оператора, Страница: 32 / 56

Figure 35
Changing the Engine Oil
Note:
Dispose of the used oil at a recycling center.
1. Park the machine so that the drain side is slightly
lower than the opposite side to assure the oil drains
completely.
2. Stop the engine, set the parking brake, remove the key,
and wait for all moving parts to stop before leaving the
operating position.
3. Change the engine oil as shown in Figure 37 .
Note:
Torque drain plug to 27-33 N-m (20-24 ft-lb).
Figure 36
Figure 37
4. Slowly pour approximately 80% of the specified oil
into the filler tube, and slowly add the additional oil to
bring it to the
Full mark ( Figure 38 ).
32