Toro 22983, Руководство оператора

Страница: 24 / 52

g007823
Figure 22
Greasing the Trencher
Housing
Service Interval: Every 40 hours
Grease Type: General-purpose grease.
1. Park the machine on a level surface, engage the
parking brake, and lower the boom.
2. Shut off the engine and remove the key.
3. Clean the trencher housing grease fitting with a
rag and connect a grease gun to it (
Figure 23 ).
g008334
Figure 23
4. Pump grease into the fitting until grease comes
out of the grease valve located next to the fitting.
5. Wipe up any excess grease.
Engine Maintenance
Engine Safety
•
Shut off the engine before checking the oil or
adding oil to the crankcase.
•
Do not change the engine governor setting or
overspeed the engine.
•
Keep your hands, feet, face, clothing, and other
body parts away from the muffler and other hot
surfaces.
Identifying the Engine
Use the following graphic to identify the engine you
have and proceed to the section listed below for
service (
Figure 24 ).
g252303
Figure 24
1. Kohler engine 2. Toro engine
•
For Kohler engine maintenance, refer to Servicing
a Kohler ® Engine (page 25) .
•
For Toro engine maintenance, refer to Servicing a
Toro Engine (page 29) .
24