Toro 22615, Руководство оператора

Страница: 7 / 24

Product Overview
Figure 3
1. Throttle lever 8. Cutting wheel
2. Hour meter 9. Belt cover
3. Cyclone air filter 10. Lift
4. Choke 11. Fuel cap
5. Fuel valve 12. Parking brake
6. Sediment cup 13. Safety bail
7. Starter 14. Handle
Controls
Become familiar with all the controls ( Figure 3 and Figure 4 )
before you start the engine and operate the machine.
Throttle Lever
The throttle lever controls engine speed. With the lever down,
in the D
ISENGAGE
position, the engine runs at idle. This is
also the starting position. When the engine speed increases,
to the E
NGAGED
position, the centrifugal clutch engages and
the cutting wheel rotates.
Figure 4
1. Throttle—Disengage
position 2. Throttle—Engaged
position
Parking Brake
The parking brake holds the left wheel from turning to secure
the machine and for easy movement of the machine from side
to side when grinding the stump.
G014632
Figure 5
1. Pull back to engage brake
Hour Meter
When the engine is off, the hour meter displays the number
of hours of operation that have been logged on the machine.
7