Toro 22600HD SGR-6, Руководство оператора

Страница: 9 / 24

Specifications
Note:
Specifications and design are subject to change
without notice.
Cutting Depth 30 cm (12 inches)
Length 127 cm (50 inches)
Width 56 cm (22 inches)
Height 107 cm (42 inches)
Weight
47 kg (103 lb)
Attachments/Accessories
A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
Operation
Note:
Determine the left and right sides of the machine
from the normal operating position.
Important:
Before operating, check the fuel and oil
level, and remove debris from the machine. Also, ensure
that the area is clear of people and debris. You should
also know and have marked the locations of all utility
lines.
Before Starting
•
Dig away the earth and remove any stones near the tree
stump that may interfere with your work. Check that the
ground is free of foreign objects, such as electrical cables,
barbed wire, etc.
•
Cut or trim the stump using a power saw.
• Review all the safety decals on the machine.
•
Use a hard-hat, hearing, and eye protection. A mesh
visor alone does not provide sufficient eye protection;
supplement with protective glasses.
•
Ensure that you are familiar with safety regulations and
shutdown procedures described in this manual.
•
Ensure that all guards are in place and in good condition.
•
Ensure that the blades and cutters are in place and in
good condition.
•
Ensure that the work area, cutter, and stump in particular
are free from metallic objects such as wire, nails, etc. that
could be thrown out and injure persons in the vicinity
and damage the equipment.
•
Ensure that everyone, including children and animals,
maintain a distance of at least 15 m (50 feet) from the
machine. Debris can be thrown out and injure people
and animals.
9