This product complies with all relevant European
directives, for details please see the separate product
specific Declaration of Conformity (DOC) sheet.
DANGER
There may be buried power, gas, and/or telephone
lines in the work area. Shock or explosion may
occur if you dig into them.
Have the property or work area marked for buried
lines and do not dig in marked areas. Contact your
local marking service or utility company to have the
property marked (for example, in the United States,
call 811 for the nationwide marking service).
Introduction
The trencher heads are attachments designed for use on
Toro compact utility loaders with a variety of booms
and chains to dig trenches in soil to facilitate the burying
of cabling and piping. They are not intended for use in
cutting hard materials such as wood or concrete.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid injury
and product damage. You are responsible for operating
the product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a
dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready. Figure 1
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
G008933
1
Figure 1
1.
Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety alert symbol
(Figure 2), which signals a hazard that may cause serious
injury or death if you do not follow the recommended
precautions.
Figure 2
1.
Safety alert symbol
This manual also uses 2 words to highlight information.
Important
calls attention to special mechanical
information and
Note
emphasizes general information
worthy of special attention.
Contents
Introduction................................................................. 2
Safety ........................................................................... 3
Stability Ratings.................................................... 4
Safety and Instructional Decals ............................. 5
Setup............................................................................ 6
1 Installing the Boom and Digging
Chain ............................................................... 6
2 Installing the Safety Bar...................................... 6
3 Installing the Spoils Auger.................................. 7
4 Checking the Bearing Case Lube Level................ 7
Product Overview ........................................................ 8
© 2010—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
2
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved
