Toro 22337CP, Руководство оператора

Страница: 26 / 44

Maintenance
Note:
Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first 8 hours
• Replace the hydraulic filter.
• Torque the wheel lug nuts to 50 ft-lb (68 N
⋅
m).
After the first 50 hours
• Change the engine oil and filter.
Before each use or daily
• Drain water from the fuel filter.
• Check the engine oil level.
• Check the engine coolant level.
• Remove debris from the traction unit.
• Test the parking brake
• Check the tire pressure.
• Grease the traction unit.
• Check for loose fasteners.
Every 25 hours
• Check the hydraulic fluid level.
• Check the hydraulic lines for leaks, loose fittings, kinked lines, loose mounting
supports, wear, weather, and chemical deterioration.
Every 75 hours
• Change the engine oil and filter (more frequently when operating conditions are
extremely dusty or sandy).
• Check the battery electrolyte level. (Replacement battery only)
• Check the battery cable connections.
Every 100 hours
• Torque the wheel lug nuts to 50 ft-lb (68 N
⋅
m).
Every 200 hours
• Replace the primary air filter.
Every 400 hours
• Replace the hydraulic filter.
Every 600 hours
• Replace the safety air filter.
Every 1,500 hours
• Replace all moving hydraulic hoses.
Yearly
• Change the fuel filter.
• Change the hydraulic fluid.
Yearly or before storage
• Touch up chipped paint
Important:
Refer to your
Engine Operator’s Manual
for additional maintenance procedures.
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure
you or other bystanders.
Remove the key from the ignition before you do any maintenance.
26