Toro 22282 Series, Руководство оператора

Страница: 9 / 32

Setup
Important:
Remove and discard the protective
plastic sheet that covers the motor and any other
plastic or wrapping on the machine.
Important:
The battery pack is not fully charged
when you purchase it. Before using the machine
for the first time, refer to
Charging the Battery
Pack (page 21) .
1
Mounting the Battery
Charger (Optional)
Parts needed for this procedure:
2 Mounting hardware (not included)
Procedure
If desired, mount the battery charger securely on a
wall using the wall-mount key holes on the back of
the charger.
Mount it indoors (such as a garage or other dry place),
near a power outlet, and out of the reach of children.
Refer to Figure 3 for assistance in mounting the
charger.
Slide the charger over the appropriately positioned
hardware to secure the charger in place (hardware
not included).
g290534
Figure 3
2
Removing the Cable Guard
No Parts Required
Procedure
g328502
Figure 4
9