Toro 2226, Руководство оператора

Страница: 83 / 108

Changing the Rotary
Gearbox Drive Oil
Service Interval: After the first 100 hours—Change
the gearbox-drive oil.
Every 800 hours—Change the gearbox-drive oil
(or yearly, whichever comes first).
Note:
Change the oil when it is warm, if possible.
1. Move the machine to a level surface and move
the carriage all the way to the rear stop.
2. Shut off the engine and remove the key.
3. Remove the drain plug and drain the oil ( Figure
101 ).
g235823
Figure 101
4. Install the drain plug.
5. Remove the breather cap ( Figure 102 ).
g235824
Figure 102
6. Fill the gearbox with oil until the oil level in the
sight glass is more than half full (
Figure 100 ).
7. Install the breather cap ( Figure 102 ).
83