Toro 2226, Руководство оператора

Страница: 85 / 108

Cooling System
Maintenance
Coolant specification: 50/50 solution of
ethylene-glycol antifreeze and water or equivalent
Engine and Radiator coolant capacity: 16.77 L
(17.7 US qt)
WARNING
If you remove the radiator cap from a hot
engine, hot coolant could spray, causing
scalding.
• Wear face protection when opening the
radiator cap.
• Allow the cooling system to cool down to
below 50°C (120°F) before removing the
radiator cap.
• Follow the instructions for checking and
maintaining the engine cooling system.
WARNING
Coolant is toxic.
• Keep coolant away from children and pets.
• If you are not using the same coolant
again, dispose of it according to local
environmental regulations.
Cooling System Safety
•
Swallowing engine coolant can cause poisoning;
keep it out of reach of children and pets.
•
Discharge of hot, pressurized coolant or touching
a hot radiator and surrounding parts can cause
severe burns.
– Always allow the engine to cool at least 15
minutes before removing the radiator cap.
– Use a rag when opening the radiator cap, and
open the cap slowly to allow steam to escape.
Checking the Coolant Level
in the Reservoir
Service Interval: Before each use or daily
Important:
Do not remove the radiator filler cap
during this procedure.
1. Move the machine to a level surface, shut off
the engine, and remove the key.
2. Allow the engine to cool.
3. Open the front hood.
4. Check the coolant level in the reservoir ( Figure
104 ).
g220074
Figure 104
1. Radiator cap 2. Reservoir
5. Add the specified coolant until the coolant level
is 1/2 the reservoir capacity.
Note:
Ensure that the coolant solution is
thoroughly mixed before filling the reservoir.
85