Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
Oval-head bolt (5/16 x 1-1/2 inches)
2
Bolt (5/16 x 1-1/2 inches)
2
Spacer
2
Locknut (5/16 inch)
4
1
Cable tie
1
Install the handle.
2
SAE 30W detergent oil with an API
service classification of SH, SJ, SL, or
higher (not supplied with the mower)
20 oz.
(0.55 l)
Fill the engine with oil.
3
No parts required
–
Install the recycle plug or grass bag.
1
Installing the Handle
Parts needed for this procedure:
2
Oval-head bolt (5/16 x 1-1/2 inches)
2
Bolt (5/16 x 1-1/2 inches)
2
Spacer
4
Locknut (5/16 inch)
1
Cable tie
Procedure
1. Remove the 2 screws that hold the back cover in
place and remove the back cover (Figure 3).
Figure 3
2. Attach the handle to the deck of the machine
(Figure 4) using the 4 bolts, 4 locknuts, and 2 spacers
in the loose parts bag.
Figure 4
1.
Oval-head bolt (5/16 x
1-1/2 inches) (2)
3.
Spacer (2)
2.
Bolt (5/16 x 1-1/2 inches)
(2)
4.
Locknut (5/16 inch) (4)
Note:
You can set the handle height in one of two
positions (Figure 5). Set the handle to a height that is
comfortable for you.
8
