Toro 22175 Скачать руководство пользователя страница 3

3

Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model and
serial numbers of your product ready. Figure 1 illustrates
the location of the model and serial numbers on the
product.

1

Figure 1

1.

Location of the model and serial numbers

Write the product model and serial numbers in the space
below:

Model No.

Serial No.

This manual identifies potential hazards and has special
safety messages that help you and others avoid personal
injury and even death. DangerWarning, and Caution are
signal words used to identify the level of hazard.
However, regardless of the hazard, be extremely careful.

Danger signals an extreme hazard that will cause serious
injury or death if you do not follow the recommended
precautions.

Warning signals a hazard that may cause serious injury or
death if you do not follow the recommended precautions.

Caution signals a hazard that may cause minor or
moderate injury if you do not follow the recommended
precautions.

This manual uses 2 other words to highlight information.

Important

 calls attention to special mechanical

information and Note: emphasizes general information
worthy of special attention.

Safety

This lawn mower meets or exceeds the CPSC blade
safety requirements for walk-behind rotary lawn
mowers and the B71.4 specifications of the American
National Standards Institute in effect at the time of
production.

Engine exhaust contains carbon monoxide, an
odorless, deadly poison that can kill you.

Do not run the engine indoors or in an enclosed
area.

Warning

To ensure maximum safety and best performance, and
to gain knowledge of the product, it is essential that
you and any other operator of the lawn mower read
and understand the contents of this manual before the
engine is ever started.

 This is the safety alert symbol. It is used to alert

you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid
possible injury or death.

Improperly using or maintaining this lawn mower
could result in injury or death. To reduce this potential,
comply with the following safety instructions.

Safe Operating Practices

The following instructions are from the ANSI/OPEI
B71.4–1999 standard.

Training

Read the Operator’s Manual and other training
material. If the operator(s) or mechanic(s) can not read
English it is the owner’s responsibility to explain this
material to them.

Become familiar with the safe operation of the
equipment, operator controls, and safety signs.

All operators and mechanics should be trained. The
owner is responsible for training the users.

Never let children or untrained people operate or
service the equipment. Local regulations may restrict
the age of the operator.

The owner/user can prevent and is responsible for
accidents or injuries occurring to themselves, other
people, or property.

Содержание 22175





























Отзывы: