•
To reduce the fire hazard, keep the engine, silencer,
battery compartment and gasoline storage free of
grass, leaves, or excessive grease.
•
Check grass catcher components and the discharge
guard frequently and replace with manufacturer’s
recommended parts, when necessary.
•
Replace worn or damaged parts for safety.
•
Replace faulty silencers.
•
If the fuel tank has to be drained, do this outdoors.
•
Do not change the engine governor settings or
overspeed the engine. Operating an engine at
excessive speed can increase the hazard of personal
injury.
•
Be careful during adjustment of the mower to
prevent entrapment of the fingers between moving
blades and fixed parts of the mower.
•
To ensure the best performance and safety,
purchase only genuine Toro replacement parts
and accessories. Do not use
will fit
parts and
accessories; they may cause a safety hazard.
Sound Pressure
This unit has a sound pressure level at the operator’s
ear of 98 dBA, which includes an Uncertainty Value (K)
of 1 dBA. The sound pressure level was determined
according to the procedures outlined in EN 836.
Sound Power
This unit has a guaranteed sound power level of 91 dBA,
which includes an Uncertainty Value (K) of 1 dBA. The
sound power level was determined according to the
procedures outlined in ISO 11094.
Vibration, Hand/arm
This unit does not exceed hand/arm vibration levels of
5.8 m/s
2
for the right hand and 4.0 m/s
2
for the left
hand, each including an Uncertainty Value (K) of 2.3
m/s
2
. The measured values were determined according
to the procedures outlined in EN 836.
Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area of
potential danger. Replace any decal that is damaged or lost.
Manufacturer’s Mark
1.
Indicates the blade is identified as a part from the original
machine manufacturer.
110-4978
1.
Warning—read the
Operator’s Manual.
2.
Thrown object hazard—keep bystanders a safe distance from the machine.
3.
Cutting, dismemberment hazard of hand or foot—stop the engine and remove the spark plug wire before performing any
maintenance on the machine.
4.
Cutting, dismemberment hazard of hand or foot—stay away from moving parts.
5.
Warning—stop the engine before leaving the machine.
5
