Toro 21768, Руководство пользователя

Страница: 16 / 128

Bagging the Clippings
Use the grass bag when you want to collect grass and leaf clippings from the lawn.
If the side-discharge chute is on the machine, remove it; refer to Removing the Side-Discharge Chute (page
15) . If the bag-on-demand lever is in the recycling position, move it to the bagging position; refer to Operating
the Bag-on-Demand Lever (page 14) .
Installing the Grass Bag
1. Raise and hold up the rear deflector (A of Figure 15 ).
2. Install the grass bag, ensuring that the pins on the bag rest in the notches on the handle (B of Figure 15 ).
3. Lower the rear deflector.
g233434
Figure 15
Removing the Grass Bag
To remove the bag, reverse the steps in Installing the Grass Bag (page 14) .
Operating the
Bag-on-Demand Lever
The bag-on-demand feature allows you to either
collect or recycle grass and leaf clippings while the
grass bag is attached to the machine.
•
To bag the grass and leaf clippings , press the
button on the bag-on-demand lever and move the
lever forward until the button on the lever pops up
(
Figure 16 ).
g234642
Figure 16
1. Bag-on-demand lever (in the recycling position)
•
To recycle or side-discharge the grass and
leaf clippings
, press the button on the lever and
move the lever rearward until the button on the
lever pops up.
Important:
For proper operation, shut off
the engine, wait for all moving parts to stop,
and then remove any grass clippings and
14