Toro 21690, Руководство оператора

Страница: 12 / 120

Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Before Operation
Before Operation Safety
General Safety
•
Always shut off the machine, remove the
electric-start button (if equipped), wait for all
moving parts to stop, and allow the machine to cool
before adjusting, servicing, cleaning, or storing it.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Check that all guards and safety devices, such as
deflectors and/or grass catcher, are in place and
functioning properly.
•
Always inspect the machine to ensure that the
blades and blade bolts are not worn or damaged.
•
Inspect the area where you will use the machine,
and remove all objects that could interfere with
the operation of the machine or that the machine
could throw.
•
Contact with the moving blade will cause serious
injury. Do not put your fingers under the housing
when adjusting the cutting height.
Filling the Fuel Tank
•
For best results, use only clean, fresh, unleaded
gasoline with an octane rating of 87 or higher
((R+M)/2 rating method).
•
Oxygenated fuel with up to 10% ethanol or 15%
MTBE by volume is acceptable.
•
Do not use ethanol blends of gasoline, such
as E15 or E85, with more than 10% ethanol by
volume. Performance problems and/or engine
damage may result, which may not be covered
under warranty.
•
Do not use gasoline containing methanol.
•
Do not store fuel either in the fuel tank or in fuel
containers over the winter unless fuel stabilizer
has been added to the fuel.
•
Do not add oil to gasoline.
Fill the fuel tank with fresh unleaded regular gasoline
from a major name-brand service station (
Figure 9 ).
Important:
To reduce starting problems, add fuel
stabilizer/conditioner to fresh fuel as directed by
the fuel-stabilizer manufacturer.
Refer to your engine owner’s manual for additional
information.
g230458
Figure 9
11