Maintenance
Note:
Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first 5 hours
• Change the engine oil.
Before each use or daily
• Check the engine-oil level.
• Ensure that the engine stops within 3 seconds after releasing the blade-control bar.
• Clean grass clippings and dirt from under the machine.
Before storage
• Empty the fuel tank before repairs as directed and before annual storage.
Yearly
• Change the engine oil.
• Replace the blade or have it sharpened (more frequently if the edge dulls quickly).
• Clean the air cooling system; clean it more frequently in dusty operating conditions.
Refer to your engine owner's manual.
• Refer to your engine owner's manual for any additional yearly maintenance
procedures.
Important:
Refer to your engine owner's manual for additional maintenance procedures.
Note:
Replacement parts are available from an Authorized Service Dealer (go to www.toro.com to find the nearest dealer)
or at www.shoptoro.com.
Preparing for Maintenance
1.
Stop the engine and wait for all moving parts to stop.
2.
Disconnect the spark-plug wire from the spark plug
(
) before performing any maintenance
procedure.
Figure 20
3.
After performing the maintenance procedure(s),
connect the spark-plug wire to the spark plug.
Important:
Before tipping the machine to change
the oil or replace the blade, allow the fuel tank to
run dry through normal usage. If you must tip
the machine prior to running out of fuel, use a
hand fuel pump to remove the fuel. Always tip the
machine onto its side, with the dipstick down.
WARNING
Tipping the machine may cause the fuel to
leak. Gasoline is flammable and explosive and
can cause personal injury.
Run the engine dry or remove the gasoline
with a hand pump; never siphon.
Replacing the Air Filter
1.
Use a screw driver to open the air-filter cover (
Figure 21
2.
Replace the air filter.
3.
Install the air-filter cover.
14
