Stopping the Engine (Model
20793 only)
Service Interval:
Before each use or daily
Push the ignition toggle switch to the Stop position
(Figure 21).
Figure 21
1.
Ignition toggle switch
Remove the ignition key when you leave the mower.
Important:
When you release the blade control
bar, both the engine and blade should stop within
3 seconds. If they do not stop properly, stop using
your mower immediately and contact an Authorized
Service Dealer.
Stopping the Engine (Model
20795 only)
1. Turn the key to the Off position (Figure 22).
Figure 22
2. Remove the ignition key when you leave the mower.
Important:
When you release the blade control
bar, both the engine and blade should stop within
3 seconds. If they do not stop properly, stop using
your mower immediately and contact an Authorized
Service Dealer.
Engaging the Blade
When you start your engine, the blade does not turn.
You must engage the blade to mow.
1. Pull the control bar lock back (Figure 23).
Figure 23
2. Pull the blade control bar to the handle (Figure 24).
Figure 24
1.
Blade control bar
3. Hold the blade control bar against the handle
(Figure 25).
Figure 25
11