Toro 18-44HXLE Wheel Horse Скачать руководство пользователя страница 2

2

 2004 by The Toro Company

8111 Lyndale Avenue South
Bloomington, MN  55420-1196

Contact us at www.Toro.com

All Rights Reserved

Printed in the USA

This spark ignition system complies with Canadian
ICES-002.

Ce système d’allumage par étincelle de véhicule est
conforme à la norme NMB-002 du Canada.

Contents

Page

Introduction

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Safety

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Safe Operating Practices

3

. . . . . . . . . . . . . . . . . . . . 

Toro Riding Mower Safety

5

. . . . . . . . . . . . . . . . . . . 

Sound Pressure Level

5

. . . . . . . . . . . . . . . . . . . . . . . 

Sound Power Level

5

. . . . . . . . . . . . . . . . . . . . . . . . 

Vibration Level

5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Slope Chart

7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Safety and Instruction Decals

9

. . . . . . . . . . . . . . . . . 

Gasoline and Oil

12

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Recommended Gasoline

12

. . . . . . . . . . . . . . . . . . . . . 

Using Stabilizer/Conditioner

12

. . . . . . . . . . . . . . . . . 

Filling the Fuel Tank

12

. . . . . . . . . . . . . . . . . . . . . . . 

Checking the Engine Oil Level

12

. . . . . . . . . . . . . . . 

Operation

13

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Controls

13

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Using the Parking Brake

13

. . . . . . . . . . . . . . . . . . . . 

Positioning the Seat

14

. . . . . . . . . . . . . . . . . . . . . . . . 

Operating the Headlights

14

. . . . . . . . . . . . . . . . . . . . 

Using the Blade Control (PTO)

14

. . . . . . . . . . . . . . . 

Setting the Height-of-Cut

14

. . . . . . . . . . . . . . . . . . . . 

Starting the Engine

15

. . . . . . . . . . . . . . . . . . . . . . . . . 

Stopping the Engine

15

. . . . . . . . . . . . . . . . . . . . . . . . 

Using the Safety Interlock System

15

. . . . . . . . . . . . . 

Testing the Safety Interlock System

16

. . . . . . . . . . . . 

Pushing the Tractor Manually

17

. . . . . . . . . . . . . . . . 

Driving the Tractor Forward or Backward

17

. . . . . . . 

Stopping the Tractor

18

. . . . . . . . . . . . . . . . . . . . . . . . 

Operating Tips

18

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Maintenance

19

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Recommended Maintenance Schedule

19

. . . . . . . . . 

Servicing the Engine Oil

20

. . . . . . . . . . . . . . . . . . . . 

Servicing the Air Cleaner

21

. . . . . . . . . . . . . . . . . . . . 

Servicing the Spark Plug

22

. . . . . . . . . . . . . . . . . . . . 

Servicing the Brake

23

. . . . . . . . . . . . . . . . . . . . . . . . 

Greasing and Lubricating the Tractor

23

. . . . . . . . . . 

Checking the Tire Pressure

24

. . . . . . . . . . . . . . . . . . 

Servicing the Battery

24

. . . . . . . . . . . . . . . . . . . . . . . 

Draining the Fuel Tank

26

. . . . . . . . . . . . . . . . . . . . . . 

Replacing the Fuel Filter

27

. . . . . . . . . . . . . . . . . . . . 

Servicing the Transaxle Fluid

27

. . . . . . . . . . . . . . . . 

Page

Servicing the Fuse

27

. . . . . . . . . . . . . . . . . . . . . . . . . 

Servicing the Headlights

28

. . . . . . . . . . . . . . . . . . . . 

Cleaning and Storing the Tractor

28

. . . . . . . . . . . . . . 

Wiring Diagram

30

. . . . . . . . . . . . . . . . . . . . . . . . . . . 

Troubleshooting

31

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Introduction

Read this manual carefully to learn how to operate and
maintain your product properly. The information in this
manual can help you and others avoid injury and product
damage. Although Toro designs and produces safe
products, you are responsible for operating the product
properly and safely.

You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a dealer, or
to register your product.

Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model and
serial numbers of your product ready. Figure 1 illustrates
the location of the model and serial numbers on the
product.

m-1856

1

Figure 1

1.

Location of the model and serial numbers

Write the product model and serial numbers in the space
below:

Model No.

Serial No.

This manual identifies potential hazards and has special
safety messages that help you and others avoid personal
injury and even death. DangerWarning, and Caution are
signal words used to identify the level of hazard. However,
regardless of the hazard, be extremely careful.

Danger signals an extreme hazard that will cause serious
injury or death if you do not follow the recommended
precautions.

Содержание 18-44HXLE Wheel Horse

































Отзывы: