Toro 145-0057, Инструкция по установке

Страница: 2 / 4

2
Removing an Existing
Motor Mount
No Parts Required
Procedure
Important:
Remove and install a single motor
mount at a time (e.g., remove and install the left
motor mount, then remove and install the right
motor mount).
If both mounts are simultaneously removed, then
installed, the engine frame assembly becomes
unstable.
1. Place a jack under the engine ( Figure 1 ).
Note:
This removes the engine weight from the
parts that you remove in the next step.
g361993
Figure 1
1. Jack location
2. Remove the existing bolts, spacers, and nuts
from one of the motor mounts on the engine
frame (
Figure 2 ).
Note:
The engine frame is adjacent to the
engine, under the generator.
g361994
Figure 2
1. Bolt 4. Flat spacer
2. Engine frame
5. Nut
3. Cylinder spacer
3. Remove the existing bolt, nut, and motor mount
from the frame (
Figure 3 ).
g361995
Figure 3
1. Bolt 3. Nut
2. Motor mount
2